by Steve Waite » Tue Sep 11, 2012 5:23 pm
Hi Zoran,
The parameters to check are the runway length if you have 7000ft then only airports with 7000+ runways will come out of the filter. In the Flight Generator page, uncheck the ILS/tower/parking filters so you get the small airports come through the filter. Set your flight times appropriately; e.g. try setting minimum 45mins and maximum 4hours for your bush plane you should throw a net over loads of airports then.
In the settings page choose large size for IF window. Now go to the world map and click on the 'O' top right to get the map full page.
Thanks for your input.
Steve
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2 NVMe,
i9-9900X 64GB RTX2080ti 2TB M.2 NVMe, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10 (16TB)