Can not jump properly

[raymer]

Hi
I'm back at Flight Simming using FSX steam and low powered lap top. Can not jump without being put-
down on the ground at destination. I even get a perfect score to boot! Actualy lap top works pretty well
except Ideal Flight jumps. laptop has 2.2 gig Raedon plus Raedon video card, tuned it through Raedon
software get normaly 20-40 fps. I tried one of your newest builds off the Ideal website worse problems
than the download from Flight1 I am using DX-10 preview, your shaders. Hoping the finances will let me
back to P3D, then I can use all my software I have built up over the years. Oh for a 4gig chip, big video
card, lots of memory, etc etc. Good to get back and see how your doing..........Raymer

[Steve Waite]

Hi Raymer,

Nice to hear from you.

Can you install the latest version from the downloads page and try again? There were various problems during stages of the previews, no need to uninstall.

Also can you check the go to approach and go to final as well?

Regards,
Steve

[raymer]

Hi Steve,
I'm missing something in the new build.... I build the flight plan like I always have including Flght1
edition and it puts me at another airport with my flight setup for what I planned.Example build plan
for Pensacola Regional to San Pedro Sula honduras.....I get put into Cardiff airport all set up to fly
from Pensacola to Honduras. I don't know how to stop this, does not happen in Flight1 version, it works
like I am familiar with. Can't get off the ground......thoughts........Ray
I have done a new install with your latest build..........

[Steve Waite]

No problems like that are reported other than this.

You have the latest build - check?

Place your profile where you want to start (Pensacola).

Go to the Flight Gen page and complete a search so that a list of airports available within your parameters are listed. Choose an airport in the list and build the flight.

See how that goes.

[Steve Waite]

To be sure of things other than IF. Can you make a new profile, and without making changes, build a flight and test that to see what happens.

[Steve Waite]

..are you on IF Special Edition or Original?

[Steve Waite]

Also check that you have not included a Tour File. On the Flight Gen page look at the Subset function. With a Tour loaded you will be sent to the next item in the tour when you build the flight from the home page.
That could be your issue.

[raymer]

Hi Steve,
Still can't get off the ground with the "new build" I set it for Pensacola, build @ flt from Pensacola to
Nassau, start the flight it puts me @ airport in France with flight set up for Pensacola-Nassau ATC loaded.
I am using FSX special edition but not the augmented one. I am using FSX steam version. Two things, I am
using the non augmented version, and my computer really is under=powered this easily coud be problem.
I'm back to fresh install of Flight1 Special Edition I can at least get off the ground. I will play with it some
more....try timed jumps, jumps to landing. Pretty neat the system gives me a perfect score when it puts
me on the ground. Try & get you some screenshots. Really appreciate yourhelp, I hope to get back to P3D
and some seriouse simming.....Most Sincerly.....Ray Rentschler

[Steve Waite]

The thing to do is run up the default profile and build the flight. Then we can look into it further. Could be a condition of the plane settings, scenery whatever, who knows. I need you to test a default profile to ascertain anything at all.

[Steve Waite]

The reason to test a fresh unchanged profile is that it is set up specifically for a known test condition, with the B58. One thing can und that is having scenery around EGFF but generally that makes no difference, but can. So we check the defaults and move on from there. It seems like you need to go to the flight gen page and make a setting to obtain a valid search. That's the way forward.