Can not jump properly

This Forum is for Support questions only for Ideal Flight. Please post other questions and suggestions in the General Use & Ideas Forum

Moderators: Steve Waite, SysAdmin

Re: Can not jump properly

Postby Steve Waite » Sat Sep 28, 2019 10:45 pm

If the search is empty you can do CTRL+V at the home page and type in the two ICAO codes, Dept and Dest, with a space between. Your profile will be taken to the departure and the flight should then build to your destination.

But first always, always, test out a default scenario first - or much time will be lost attempting to circumvent problems elsewhere or other things confusing the issues. Also reinstalling can only reset the defaults and even then will pick up the current profile behaviour.

If you can get the flight built properly we can look at the jumps. The old version you have can be landed without much errors as the G force is off.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2 NVMe,
i9-9900X 64GB RTX2080ti 2TB M.2 NVMe, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10 (16TB)
Steve Waite
 
Posts: 5055
Joined: Wed Jun 29, 2011 12:02 am

Re: Can not jump properly

Postby Steve Waite » Sat Sep 28, 2019 11:18 pm

..I'm out of the office till Monday so can't check it properly till then. Anything you can find will be helpful. It's been very good of you to call in with the problem. There could be a simple setting to make or something amiss with the particular version you have. I will continue progressing the preview builds for the next update and so if it's a bug it will be addressed right away.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2 NVMe,
i9-9900X 64GB RTX2080ti 2TB M.2 NVMe, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10 (16TB)
Steve Waite
 
Posts: 5055
Joined: Wed Jun 29, 2011 12:02 am

Re: Can not jump properly

Postby Steve Waite » Mon Sep 30, 2019 10:58 pm

Another thing I'm thinking about, with FSX:SE have you set the IF desktop icon to start as admin?
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2 NVMe,
i9-9900X 64GB RTX2080ti 2TB M.2 NVMe, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10 (16TB)
Steve Waite
 
Posts: 5055
Joined: Wed Jun 29, 2011 12:02 am

Re: Can not jump properly

Postby Steve Waite » Mon Sep 30, 2019 11:12 pm

The building flight issue could be something to do with the Aircraft Parameters page for the plane selected. It's always a good idea to try with a stock unchanged profile whenever coming across odd situations.

Another thing to look for when starting the sim, is that some addons can take several minutes to complete their startup, for example traffic addons.

Try a test with some stuff turned off or wait a few minutes before jumping or especially go to approach and final. also try with IF traffic set to zero.

I've not been able to recreate the problem so far. Will keep looking into it.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2 NVMe,
i9-9900X 64GB RTX2080ti 2TB M.2 NVMe, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10 (16TB)
Steve Waite
 
Posts: 5055
Joined: Wed Jun 29, 2011 12:02 am

Previous

Return to Support

Who is online

Users browsing this forum: No registered users and 6 guests