Your helpful tips.

This Forum is for Support questions only for Ideal Flight. Please post other questions and suggestions in the General Use & Ideas Forum

Moderators: Steve Waite, SysAdmin

Re: Your helpful tips.

Postby Steve Waite » Wed Apr 15, 2020 6:50 am

A mini walk through starting out with Ideal Flight:


1. Start Ideal Flight from the desktop icon. A notify window shows IF is starting, a thunderclap from the simulator is played so you can tell IF is starting.

2. The Start page appears and after a few seconds moves to the main page - home. From the home page we can go back to the start page with the escape menu Icon Shelf. On the start page we configure things like indexing and navigation data.

3. At the home page, using the Escape key navigate to Profiles. Use the Add profile button makes Joe Pilot ID1. Rename to user name preferred. On that page the starting location can be chosen. Choose flight length times and number of flights a year, zero per year makes each next flight, in time, soon after the last.

4. From the Home page go to Aircraft selection page - select an aircraft and variation. In that page go to the Flight Parameters page and make the changes to preferred cruise speed altitudes climbs and descents and speeds. Final is determined by the full flap speed and other values described in the aircraft files. Runway length width, Jet or Victor routes. These values are used to determine the plan and the possible destinations.

5. on the Flight Generator page choose the plan type IFR with Approaches, plan builder Any Airways. Choose a length of flight time from shortest to longest. So we might put one hour to three hours. On the mission page choose IDF departure and Computed approach.

6. Back at the start page, Escape menu, icon shelf, choose New Destination. A flight is built to a compatible airport, compatible with your settings. So that destination airport chosen will be approximately 1 to 3 hours away at your cruise speed.

7. The menu Fly! or Tower choices start the simulator at the cockpit or inside the tower control room.

With this arrangement we need not make any changes or very few between flights. We let IF do the work.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2,
i9-9900X 64GB RTX2080ti 2TB M.2, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10
Steve Waite
 
Posts: 4573
Joined: Wed Jun 29, 2011 12:02 am

Re: Your helpful tips.

Postby Steve Waite » Mon Apr 27, 2020 4:05 pm

Fuel Calculations in Ideal Flight

Ideal Flight fuel works on measuring the fuel used by the aircraft. Before we know what fuel would be required for a flight we need to know the approximate Range of the aircraft. Putting a plane at cruise we can get a fuel report that assesses the fuel used and we can put the range value into the IF Aircraft Flight Parameters page.

Example in normal cruise conditions we might see a Range of 1000 NM. So for that altitude and that speed the maximum flight time can be determined by the available fuel. If we change the speed the Range will change. Also we can change the payload and the cruise altitude, each will alter the range slightly.

With a real aircraft the process of different cruise conditions produces a set of tables that can be used to approximate the fuel prediction for a flight. Since Ideal Flight is prepared for any plane past present or future, we do not have these tables. We can produce them for the simulated aircraft with Ideal Flight reporting if we want. Generally changing cruise speed produces the biggest change to Range.

If the aircraft comes with a fuel planner, for example Quality Wings, we can use that to predict the fuel and compare what we really used in flight by observing the Fuel Report in the de-brief or the flight assessment records after flying.

In short Ideal Flight predicts the fuel requirement for a specific set of conditions in which we generally fly the aircraft.

Therefore a low altitude, full payload and highest cruise speed will use the most fuel and produce the shortest Range value. We can experiment in Ideal Flight and obtain that value for our Range parameter. After that we will always have enough fuel whatever the flight planned.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2,
i9-9900X 64GB RTX2080ti 2TB M.2, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10
Steve Waite
 
Posts: 4573
Joined: Wed Jun 29, 2011 12:02 am

Re: Your helpful tips.

Postby Steve Waite » Mon Jun 29, 2020 11:14 am

Why does ideal Flight appear to index the aircraft folders twice?

Indexing aircraft occurs when the available aircraft in the simulator has changed.

We start Ideal Flight and at first there is an all users aircraft information file created from the indexing process. this is a default reference.

Next the personal aircraft information for the current profile is updated from another indexing process. This looks like a second indexing procedure.

After that, whenever we change the selected profile and the aircraft information does not contain the current available aircraft, we see another index procedure to keep the profile up to date.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2,
i9-9900X 64GB RTX2080ti 2TB M.2, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10
Steve Waite
 
Posts: 4573
Joined: Wed Jun 29, 2011 12:02 am

Re: Your helpful tips.

Postby Steve Waite » Fri Jul 10, 2020 9:27 pm

Runway Predictions

The way the simulator chooses runways depends on what is landing. Since ideal Flight does not know beforehand what is landing, it makes predicting the Active runway impossible.

The runways predicted by IF take into account the wind direction, that's all it can do. That might not be the active runway when the simulation starts due to an already landing aircraft which may land on an ILS primary direction even though the headwind component is in the wrong direction.

If no aircraft are landing, eg no AI traffic is active, or the airport has no parking, then the runway chosen is dictated by the direction component of the wind even if the headwind component is zero knots.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2,
i9-9900X 64GB RTX2080ti 2TB M.2, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10
Steve Waite
 
Posts: 4573
Joined: Wed Jun 29, 2011 12:02 am

Re: Your helpful tips.

Postby Steve Waite » Mon Jul 13, 2020 1:08 pm

Prepar3D users might notice a file ObjectLoadErrors.txt in the docs folder:

C:\Users\you\Documents\Prepar3D v5 Files\ObjectLoadErrors.txt

This file will contain some information entries which are not errors:

Code: Select all
RealismOverridesIdealFlight Information: Using default UserTips (Enabled)
RealismOverridesIdealFlight Information: Using default CrashBehavior (AutoRecover)
RealismOverridesIdealFlight Information: Using default UnlimitedFuel (Limited)
RealismOverridesIdealFlight Information: Using default AvatarNoCollision (Enabled)
RealismOverridesIdealFlight Information: Using default AircraftLabels (Enabled)


These only represent information about some changes Ideal Flight makes to the settings for the normal flight operations and are no cause for concern.
software architect at codelegend.com
equipment: i9-9980Xe 64GB 2xRTX2080ti NVLink 2TB M.2,
i9-9900X 64GB RTX2080ti 2TB M.2, i7-3960X 32GB GTX680 4TB RAID10,
NAS @7TB RAID10
Steve Waite
 
Posts: 4573
Joined: Wed Jun 29, 2011 12:02 am

Previous

Return to Support

Who is online

Users browsing this forum: No registered users and 4 guests

cron